PDF Publication Title:
Text from PDF Page: 025
BC Bugwood Envirochem Services Inc. 4 PROCESSING BUGWOOD 4.1 Pelletizing Bugwood 4.1.1 Process Pelletizing serves two purposes: the concentration of energy in wood, providing an advantage in transportation over roundwood and chips, and creating a fuel that burns longer and is easy to handle in combustion applications. Pellet production from wood is already being practised at many sites in BC (see Figure 4.1.1), and in 2005, a license was granted to CH Anderson to produce pellets from bugwood for export to Europe (UK). Figure 4.1.1 Wood Pellet Production in British Columbia (existing and planned capacities) [Source: DRC 2005a] There is no Canadian standard defining the quality of pellets, but to be fit for use in the U.S. or Europe, pellets need to have a maximum moisture content of 10% (wet basis), which will require drying in most cases, pending further results from on-going research on the physical properties of bugwood. The bark needs to be removed as it would increase ash content beyond what is acceptable according to international standards. It is envisaged that the bark is burned to create process heat for pre-drying of wood. To make pellets from wood, the wood needs to be ground into pieces smaller than 3 mm, which cannot be achieved with a chipper. A hammer mill is therefore included in the process diagram (Figure 4.1.2), which will deliver the right particle size. Figure 4.1.2 Pellet Mill Process Diagram Ring Debark er Chipper Rotary Drum Dryer (to 10% mc) Hammer Mill (to 3 mm) Pellet Mill Page 16PDF Image | IDENTIFYING ENVIRONMENTALLY PREFERABLE USES FOR BIOMASS
PDF Search Title:
IDENTIFYING ENVIRONMENTALLY PREFERABLE USES FOR BIOMASSOriginal File Name Searched:
bib97175.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)