PDF Publication Title:
Text from PDF Page: 001
20 Working Fluid Selection for Low Temperature Solar Thermal Power Generation with Two-stage Collectors and Heat Storage Units Pei Gang, Li Jing, Ji Jie Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Jinzhai Road 96#, Hefei City, Anhui Province, People’s Republic of China 1. Introduction Organic Rankine Cycle (ORC) is named for its use of an organic, high molecular mass fluid that boils at a lower temperature than the water. Among many well-proven technologies, the ORC is one of the most favorable and promising ways for low-temperature applications. In comparison to water, organic fluids are advantageous when the plant runs at low temperature or low power. The ORC is scalable to smaller unit sizes and higher efficiencies during cooler ambient temperatures, immune from freezing at cold winter nighttime temperatures, and adaptable for conducting semi-attended or unattended operations [1]. Simpler and cheaper turbine can be used due to the limited volume ratio of organic fluid at the turbine outlet and inlet [2]. In the case of a dry fluid, ORC can be employed at lower temperatures without requiring superheating. This results in a practical increase in efficiency over the use of the cycle with water as the working fluid [3]. ORC can be easily modularized and utilized in conjunction with various heat sources. The success of the ORC technology is reinforced by high technological maturity of majority of its components, spurred by extensive use in refrigeration applications [4]. Moreover, electricity generation near the point of use will lead to smaller-scale power plants, and thus the ORC is particularly suitable for off-grid generation. The selection of the working fluid is of key importance in ORC applications. This is because the fluid must have not only thermophysical properties that match the application but also adequate chemical stability at the desired working temperature. There are several optimal characteristics of the working fluid: 1. Dry or isentropic fluid to avoid superheating at the turbine inlet, for the sake of an acceptable cycle efficiency; 2. Chemical stability to prevent deteriorations and decomposition at operating temperatures; 3. Non-fouling, non-corrosiveness, non-toxicity and non-flammability; 4. Good availability and low cost. However, not all the desired general requirements can be satisfied in a practical ORC. In the previous research, numerous theoretical and experimental studies have focused on ORC fluid selection with special respect to thermodynamic properties. Hung et al. studied waste www.intechopen.comPDF Image | Working Fluid Selection for Low Temperature Solar Thermal Power Generation with Two-stage Collectors and Heat Storage Units
PDF Search Title:
Working Fluid Selection for Low Temperature Solar Thermal Power Generation with Two-stage Collectors and Heat Storage UnitsOriginal File Name Searched:
12236.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |