PDF Publication Title:
Text from PDF Page: 165
5. Triple paned, operable windows with individual sunshades: Aggressive window shading is designed to address different orientations and positions of glazed openings. Occupants can open some windows to bring in fresh air and cool the building naturally. 6. Precast concrete insulated panels: A thermally massive exterior wall assembly using an insulated precast concrete panel system provides significant thermal mass to moderate the building’s internal temperature. 7. Radiant heating and cooling: Approximately 42 miles of radiant piping runs through all floors of the building, using water instead of forced air as the cooling and heating medium in the majority of workspaces. 8. Underfloor ventilation: A demand-controlled dedicated outside air system provides fresh air from a raised floor when building windows are closed on the hottest and coldest days. Ventilation is distributed through an underfloor air distribution system. Evaporative cooling and energy recovery systems further reduce outdoor air heating and cooling loads. 9. Energy efficient data center and workstations: A fully contained hot and cold aisle datacenter configuration allows for effective air-side economizer cooling with evaporative boost when needed while capturing waste heat for use in the building. Plug loads are minimized with extensive use of laptops and high-efficiency office equipment. 10. Onsite solar energy system: Approximately 1.6 MW of onsite photovoltaics (PV) will be installed and dedicated to the Research Support Facilities. Rooftop PV power will be added through a Power Purchase Agreement, and PV power from adjacent parking areas will be purchased with 2009 ARRA funding. Opportunity #1 – Net Zero Energy Commercial DOD Building Using Novel EnergyPlus Optimization Analysis Several labs and private sector companies are developing new features and front-end user interfaces for Energy Plus. However, a comprehensive front end that is free to the public does not exist. To NREL’s knowledge, a comprehensive optimization tool for Energy Plus is also not available through any other organization. The optimization tool NREL has developed is currently an internal R&D tool at NREL and isn’t currently publicly available. The optimization tool is discussed here because it is the only tool that is currently being used for the development of new construction energy efficiency standards throughout the country. The recommendations and benefits listed here could be potentially satisfied by another program or tool with similar capabilities. NREL develops and utilizes advanced energy modeling tools to help architects, engineers, and facility managers understand the energy implications of their designs and maximize the efficiency of their buildings. Whole-building energy modeling and optimization are important tools for achieving energy-efficient, cost-effective buildings. Optimizing a building’s design to achieve cost-effective energy savings is challenging because of the many variables involved. Manually running energy simulations to analyze all the possible system interactions is time consuming and may not return the best results. For example, if 15 energy efficiency measures were identified, a total of 3,269,017 (1515) different simulations would be needed to model all of the different combinations of building designs. 142PDF Image | 4th Annual Chena Renewable Energy Fair
PDF Search Title:
4th Annual Chena Renewable Energy FairOriginal File Name Searched:
50172.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |