PDF Publication Title:
Text from PDF Page: 011
Crystals 2018, 8, 425 11 of 12 Author Contributions: Formal analysis, K.C.; Investigation, X.G.; Methodology, Q.L.; Writing—original draft, H.Z.; Writing—review & editing, Z.C. Funding: This research was funded by the National Natural Science Foundation of China with grants [51604042, 51874048] and the Natural Science Foundation of Hunan Province of China with grant [2016JJ3008]. Conflicts of Interest: The authors declare no conflict of interest. References 1. Goodenough, J.B.; Kim, Y. Challenges for rechargeable batteries. J. Power Sources 2011, 196, 6688–6694. [CrossRef] 2. Chen, Z.; Qin, Y.; Amine, K.; Sun, Y.-K. Role of surface coating on cathode materials for lithium-ion batteries. J. Mater. Chem. 2010, 20, 7606–7612. [CrossRef] 3. Li, H.; Zhou, H. Enhancing the performances of Li-ion batteries by carbon-coating: Present and future. Chem. Commun. 2012, 48, 1201–1217. [CrossRef] [PubMed] 4. Ohzuku, T.; Makimura, Y. Layered Lithium insertion material of LiNi1/2Mn1/2O2: A possible alternative to LiCoO2 for advanced lithium-ion batteries. Chem. Lett. 2001, 30, 744–745. [CrossRef] 5. Roberts, M.; Owen, J. High-throughput method to study the effect of precursors and temperature, applied to the synthesis of LiNi1/3Co1/3Mn1/3O2 for lithium batteries. ACS Comb. Sci. 2011, 13, 126–134. [CrossRef] [PubMed] 6. Yang, C.; Zhang, X.; Huang, M.; Huang, J.; Fang, Z. Preparation and Rate Capability of Carbon Coated LiNi1/3Co1/3Mn1/3O2 as Cathode Material in Lithium Ion Batteries. ACS Appl. Mater. Interfaces 2017, 9, 12408–12415. [CrossRef] [PubMed] 7. Gao, P.; Li, Y.; Liu, H.; Pinto, J.; Jiang, X.; Yang, G. Improved high rate capacity and lithium diffusion ability of LiNi1/3Co1/3Mn1/3O2 with ordered crystal structure. J. Electrochem. Soc. 2012, 159, A506–A513. [CrossRef] 8. Jiang, K.-C.; Xin, S.; Lee, J.-S.; Kim, J.; Xiao, X.-L.; Guo, Y.-G. Improved kinetics of LiNi1/3 Mn1/3 Co1/3 O2 cathode material through reduced graphene oxide networks. Phys. Chem. Chem. Phys. 2012, 14, 2934–2939. [CrossRef] [PubMed] 9. Zhang, Y.; Jia, D.; Tang, Y.; Huang, Y.; Pang, W.; Guo, Z.; Zhou, Z. In situ chelating synthesis of hierarchical LiNi1/3Co1/3Mn1/3O2 polyhedron assemblies with ultralong cycle life for Li-ion batteries. Small 2018, 14, 1704354. [CrossRef] [PubMed] 10. Zhu, H.; Li, J.; Chen, Z.; Li, Q.; Xie, T.; Li, L.; Lai, Y. Molten salt synthesis and electrochemical properties of LiNi1/3Co1/3Mn1/3O2 cathode materials. Synth. Met. 2014, 187, 123–129. [CrossRef] 11. Chen, Z.Y.; Xie, T.; Li, L.J.; Xu, M.; Zhu, H.L.; Wang, W.H. Characterization of Na substituted LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium ion battery. Ionics 2014, 20, 629–634. [CrossRef] 12. Shaju, K.M.; Rao, G.V.S.; Chowdari, B.V.R. Performance of layered Li(Ni1/3 Co1/3 Mn1/3 )O2 as cathode for Li-ion batteries. Electrochim. Acta 2002, 48, 145–151. [CrossRef] 13. Periasamy, P.; Kalaiselvi, N.; Kim, H.S. High voltage and high capacity characteristics of LiNi1/3Co1/3Mn1/3O2 cathode for lithium battery applications. Int. J. Electrochem. Sci. 2007, 2, 689–699. 14. Kim, G.-H.; Kim, J.-H.; Myung, S.-T.; Yoon, C.S.; Sun, Y.-K. Improvement of high-voltage cycling behavior of surface-modified Li[Ni1/3Co1/3Mn1/3]O2 cathodes by fluorine substitution for li-ion batteries. J. Electrochem. Soc. 2005, 152, A1707–A1713. [CrossRef] 15. Zeng, Y.W. Investigation of LiNi1/3 Co1/3 Mn1/3 O2 cathode particles after 300 discharge/charge cycling in a lithium-ion battery by analytical TEM. J. Power Sources 2008, 183, 316–324. [CrossRef] 16. Li, X.; Wei, Y.J.; Ehrenberg, H.; Du, F.; Wang, C.Z.; Chen, G. Characterizations on the structural and electrochemical properties of LiNi1/3Mn1/3Co1/3O2 prepared by a wet-chemical process. Solid State Ionics 2008, 178, 1969–1974. [CrossRef] 17. Lv, D.; Wang, L.; Hu, P.; Sun, Z.; Chen, Z.; Zhang, Q.; Cheng, W.; Ren, W.; Bian, L.; Xu, J.; et al. Li2O-B2O3-Li2SO4 modified LiNi1/3Co1/3Mn1/3O2 cathode material for enhanced electrochemical performance. Electrochim. Acta 2017, 247, 803–811. [CrossRef] 18. Li, X.; Peng, H.; Wang, M.-S.; Zhao, X.; Huang, P.-X.; Yang, W.; Xu, J.; Wang, Z.-Q.; Qu, M.-Z.; Yu, Z.-L. Enhanced electrochemical performance of Zr-modified layered LiNi1/3Co1/3Mn1/3O2 cathode material for lithium-ion batteries. ChemElectroChem 2015, 3, 130–137. [CrossRef]PDF Image | Enhanced High Voltage Performance of Chlorine Bromine
PDF Search Title:
Enhanced High Voltage Performance of Chlorine BromineOriginal File Name Searched:
crystals-08-00425.pdfDIY PDF Search: Google It | Yahoo | Bing
Product and Development Focus for Infinity Turbine
ORC Waste Heat Turbine and ORC System Build Plans: All turbine plans are $10,000 each. This allows you to build a system and then consider licensing for production after you have completed and tested a unit.Redox Flow Battery Technology: With the advent of the new USA tax credits for producing and selling batteries ($35/kW) we are focussing on a simple flow battery using shipping containers as the modular electrolyte storage units with tax credits up to $140,000 per system. Our main focus is on the salt battery. This battery can be used for both thermal and electrical storage applications. We call it the Cogeneration Battery or Cogen Battery. One project is converting salt (brine) based water conditioners to simultaneously produce power. In addition, there are many opportunities to extract Lithium from brine (salt lakes, groundwater, and producer water).Salt water or brine are huge sources for lithium. Most of the worlds lithium is acquired from a brine source. It's even in seawater in a low concentration. Brine is also a byproduct of huge powerplants, which can now use that as an electrolyte and a huge flow battery (which allows storage at the source).We welcome any business and equipment inquiries, as well as licensing our turbines for manufacturing.| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |