PDF Publication Title:
Text from PDF Page: 017
1.5 Other ORC arrangements 1.5.1 Regenerator Although mentioned in the previous section, the regenerator was not shown in the diagrams. Although it is not obligatory, its inclusion may be beneficial and its location is shown in Figure 6. The purpose of using the regenerator is to recover heat form the superheated vapour before it reaches the condenser. This reduces the heat duty of the condenser and at the same time raises the enthalpy of the working fluid leaving the pump. It thus decreases the heat duty of the preheater and thereby can improve the thermodynamic efficiency of the cycle. Figure 6 Schematic ORC with a regenerator Apart from the effect of increasing the cost of the system, the regenerator has the drawback that it can reduce the heat recoverable from the heat source. In such cases, although it raises the cycle efficiency its inclusion can reduce the recoverable power output and hence the overall conversion efficiency of the plant. However, when the heat source minimum temperature is limited to a higher value than is attainable from pure thermodynamic considerations, then it is likely to lead to an overall improvement in system efficiency. This is most likely to be the case in geothermal power plants. Temperature is the main factor, governing water mineral equilibrium in geothermal fluids. In that case, excessive cooling of the brine may result in the deposition of some minerals in the heat exchanger. Because the chemical composition of geothermal fluid is different in each field, and sometimes even varies significantly between wells located in the same field, temperature limitations for reinjected water should be estimated individually for each project. 7PDF Image | study of ORC with the expansion process twin screw machines
PDF Search Title:
study of ORC with the expansion process twin screw machinesOriginal File Name Searched:
Panesar_MPhil.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)