PDF Publication Title:
Text from PDF Page: 015
expansion must be designed in by the Distributor or Customer. Bellows style expansion joints are recommended on the water connections. In addition to the water connections, the Pressure Relief Valves (PRV’s) are routed to the enclosure in 3⁄4” NPT pipe. This PRV discharge must be externally routed and supported in accordance with local codes and requirements. A bypass is required on the hot water connections so that the hot water resource may be diverted when the Green Machine is turned off. Leaving the hot water on when the Green Machine is not running will lead to a buildup of pressure in the working fluid that can exceed the set point on the pressure relief valves resulting in a loss of working fluid. *See Appendix A-“Water Cooled Detail” for a complete drawing of the piping connections. Verify with ElectraTherm prior to planning that these are the most recent drawings and pertain to your project. Water Side Pressure Drop It is necessary to consider the Green Machine heat exchanger pressure drops, in addition to all the site plumbing pressure loss, for the hot and cold water supply pump sizing. Figure 11 shows the heat exchanger water side pressure drops as a function of flow rate. ElectraTherm System Performance S4000 Heat Exchanger Water Pressure Differentials 20 [1.4] 15 [1.0] 10 [0.7] 5 [0.3] 0 [0.0] Pre-Heater/Evaporator Water Pressure Drop Condenser Water Pressure Drop 50 100 150 [3.2] [6.3] [9.5] Water Flow Rate (gpm [l/s]) 200 250 300 [12.6] [15.8] [18.9] Figure 11: Green Machine Heat Exchanger Water Pressure Differentials Copyright © ElectraTherm, Inc. 2013. All Rights Reserved. REV 02 - 05/02/2013 Page | 15 Pressure Differential (psi [bar])PDF Image | Waste Heat to Power System Product Data and Specification Guide
PDF Search Title:
Waste Heat to Power System Product Data and Specification GuideOriginal File Name Searched:
green_machine_series_4000_water_cooled.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)