PDF Publication Title:
Text from PDF Page: 013
Performance Data The performance curves of Figure 9 show the hot and cold water conditions required to produce 50kW net power output on a water cooled Green Machine. For example, if the site cooling water temperature is 60°F [16°C] and 220 gpm [13.9 l/s], then the required hot water conditions for 50kW net power output are 225°F [107°C] and 160 gpm [10.1 l/s]. The performance curves of Figure 10 show the net power output across the allowable range of hot water conditions with constant cooling water conditions of 70°F [21°C] and 220 gpm [10.1 l/s]. For all performance estimates it is assumed that the site will provide adequate cooling capacity based on the required condensing load for the application. Performance mapping was tested under constant condensing flow of 220 gpm [13.9 l/s]; reduction of condensing flow will affect machine power output. 245 [118] 240 [116] 235 [113] 230 [110] 225 [107] 220 [104] 215 [102] 210 [99] ElectraTherm System Resource Requirements 50kW Green Machine Net Power Output (Water Cooled Condensing at 220gpm [13.9l/s]) 80F [27C] Cooling Water 70F [21C] Cooling Water 60F [16C] Cooling Water 50F [10C] Cooling Water 80 100 [5.0] [6.3] Hot Water Supply Flow Rate (gpm [l/s]) 120 140 160 180 200 [7.6] [8.8] [10.1] [11.4] [12.6] 95% of estimates are within ± 0.7kW Figure 9: Green Machine Water Cooled Net Power Output Resource Requirements Copyright © ElectraTherm, Inc. 2013. All Rights Reserved. REV 02 - 05/02/2013 Page | 13 Hot Water Supply Temperature (F [C])PDF Image | Waste Heat to Power System Product Data and Specification Guide
PDF Search Title:
Waste Heat to Power System Product Data and Specification GuideOriginal File Name Searched:
green_machine_series_4000_water_cooled.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)