Geothermal Research and Tech IEA

PDF Publication Title:

Geothermal Research and Tech IEA ( geothermal-research-and-tech-iea )

Previous Page View | Next Page View | Return to Search List

Text from PDF Page: 148

of the generation park, with consequent acceptability improvement from the local population. It will eliminate the bad smell of H2S present in the geothermal areas. Four AMIS plants were installed in 2009. Currently, a total of 23 AMIS plants have been installed allowing treatment of more than 80% of the emission due to the generation portfolio. A picture of the AMIS plant installed at the Nuova Gabbro plant (20 MW) is given in Figure 13.5. Figure 13.5. The AMIS plant for the Hg and H2S abatement installed at the 20 MW Nuova Gabbro Power Plant. 13.5 Royalties and Contributions The royalties for exploitation leases are 1186.2 €/km2. In addition, it should be noted that, by law, for each kWh generated from geothermal resources, ENEL must pay royalties to the municipalities and to the District where the plants are located and a ―one-off‖ for the new plants that will be commissioned (see Section 13.4). 13.6 Economics The geothermal projects recently developed in Italy are concerning deep resources, with relevant huge investments in drilling activities (wells up to 3000-4000 m), and, therefore, the total capital cost for a new development project is around 4 million €/MWe installed, depending on well depths, productivities, and chemical composition of the fluids. Accordingly to the above mentioned considerations, new project developments are still feasible thanks to the presence of Green Certificates. 145

PDF Image | Geothermal Research and Tech IEA

PDF Search Title:

Geothermal Research and Tech IEA

Original File Name Searched:

geo2010.pdf

DIY PDF Search: Google It | Yahoo | Bing

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info

Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info

CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)