PDF Publication Title:
Text from PDF Page: 056
exactly the same as that of case d, and hence the two have exactly the same Wrap Factor. The effect of blockage is an increase in the mean level of velocity because of the reduction in the flow passage area. Since -- is the same with or without blockage, we would thus expect the blades to have smaller wrap angles. However, upon examining the resulting blade shape in Fig. 6.36 and upon comparing it to Fig. 6.11, we observe only a minor reduction in the lean angle at the trailing edge. We can only conclude that the (V)bj factor in Eq.(6.1) has changed in such a way that the blockage does not improve the blade shapes significantly. The reversed flow regions, however, are significantly reduced, as can be seen in Fig. 6.37 and 6.38. On the pressure side of the splitter blade it is eliminated entirely. We conclude that the velocity on the blade surface has increased to eliminate the low momentum fluid region which causes the flow to reverse its direction. 6.7 Slip Factor The work done through a turbomachinery W is given by the Euler Turbine Equation which can be written as W~ = trhW(rV02 - rVOI) (6.4) where rh denotes the mass flow, w denotes the wheel rotating speed, and subscripts 2 and 1 pertain to the outlet and inlet, respectively. We see that the same amount of work done with the same mass flow can be achieved by increasing the wheel rotating speed and reducing the incoming swirl or vice versa. Slip factor is defined as the ratio of the tangential velocity over the blade rotating speed. So far, the slip factor is taken to be unity. Here an attempt will be made to assess the consequence of slip factor assuming a value less than unity. This case will be referred to as case k. A slip factor with value less than unity can be obtained by reducing the incoming swirl (tangential velocity) and increasing the rotating speedPDF Image | Radial Inflow Splitter Blades in Three-Dimensional
PDF Search Title:
Radial Inflow Splitter Blades in Three-DimensionalOriginal File Name Searched:
28467497.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)