PDF Publication Title:
Text from PDF Page: 038
BYLAW STANDARDS Note: Small is relative – "small scale facility" can be defined in a number of ways, depending on the type of facility and the context. The ranges presented here – for nameplate capacity, facility height, etc. – reflect those found in ordinances for facilities intended to serve individual residences, small businesses and farms. Nationally, "small" often applies to much larger systems, up to 100 kW. Vermont's maximum system capacity for net-metered systems (including group systems) is now 500kW. Vermont's Small Scale Renewable Energy Incentive Program (for net-metered projects) currently applies to residential solar PV and wind systems up to 10kW – though larger systems may be considered. It also applies to commercial/industrial solar PV systems up to 25 kW and wind systems up to 80kW. The state recently enacted a simplified registration process for solar PV systems up to 5kW, for which a certificate of public good may be "deemed approved." Systems up to 15kW are exempted from some utility net-metering requirements. Other common definitions of "small-scale" are based on wind tower height (e.g., less than 150 feet) or a rotor's "swept area" (e.g., 50 to 100 ft2) or the number of wind towers or ground-mounted mounted solar arrays (e.g., one or two). Prior to adopting regulations, you should do some research with local system suppliers to more specifically define what "small scale" means for your community – keeping in mind that, because the town can only regulate off-grid systems, these will likely be very small indeed. 2. Individual ground-mounted solar and wind facilities [on lots of one acre or more] that meet the following requirements: a. The facility is not located in a prohibited area identified under Subsection ___. b. A ground-mounted solar facility must meet minimum district setback requirements from property lines and rights-of-way, unless waived by the [AMP] under Section ____ (Access); and shall not exceed a total height of [15-20] feet, as measured vertically from the ground to the highest point of the structure. c. A ground-mounted wind energy facility shall not exceed a total height of [80-150] feet, or a maximum height of [30-40] feet above obstructions (e.g., structures, tree canopies) within 300 feet of the tower, which ever is greater, as measured vertically from the base of the tower at ground level to the top of the rotor blade at its highest point. The facility shall be set back at least [1.1 - 1.5] times the total facility height from all property lines, overhead utility lines, and public rights-of-way unless waived by the [AMP] under Section ____ (Access). A minimum clearance of 30 feet is required between the ground and the rotor blade tip at its lowest point. Supporting guy wires must be located at least [10-20] feet from all property lines. 36PDF Image | POLICY GUIDE FOR SOUTHERN WINDSOR COUNTY
PDF Search Title:
POLICY GUIDE FOR SOUTHERN WINDSOR COUNTYOriginal File Name Searched:
Appendix_7_Energy_Policies_Standards_A_Guide....pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |