Infinity Turbine LLC

Publication Title | Omax 55100 Waterjet With Tilt A Jet

Surplus Equipment Search Engine Series

Surplus Equipment search was updated real-time via Filemaker on:

Surplus Equipment | Return to Search List

Search Completed | Title | Omax 55100 Waterjet With Tilt A Jet
Original File Name Searched: omax-55100-600038f-55100.pdf | Google It | Yahoo | Bing

Page Number: 001
Previous Page View | Next Page View

Text | Omax 55100 Waterjet With Tilt A Jet | 001

ef ciency
• Tilt-A-Jet® taper compensating abrasivejet cutting head
(available as an option)
• Precision X-Y Axis rigidly mounted to the cutting table
• Pre-loaded linear bearings and precision ball screws
• Low maintenance, high reliability scissor-style hard plumbing
• Drive system sealed against water, dirt, and grit
• High ef ciency Generation 4 EnduroMAX® pump systems available
in 30, 40, or 50 hp with operating ef ciencies up to 85%
• Rapid Water Level Control for quiet and clean submerged cutting
• Bulk Abrasive Delivery System transports garnet from the assembly’s
large hopper into the Zero Downtime Hopper located on the Z-Axis
• Optional Variable Speed Solids Removal System (VS-SRS) designed
for tough industrial use increases uptime through automated solids removal
The OMAX Technology Guarantee entitles you, as the original owner, to free OMAX software upgrades for the life of the machine.
• No additional water required for pump cooling
• Small, ef cient footprint for minimal oorspace utilization
• Leaves behind a satin-smooth edge, reducing secondary operations • No noxious gases, liquid and oils used in, or caused by, the
machining process
• EnduroMAX pump technology delivers the highest nozzle
horsepower in the industry for faster and more ef cient cutting
• Completes most work below 80 dBA at one meter for submerged
• Environmentally “green” system with quiet and clean operation with
low electrical consumption
• Highly robust and reliable pump design capable of over 1000
hours between maintenance
• Shipped as a completely pre-assembled and factory-tested system
Speci cations subject to change without notice. 600038F © OMAX Corporation July 2017
OMAX 55100 JetMachining Center
With over a decade in operation, the OMAX 55100 JetMachining® Center is the industry standard workhorse for high speed precision machining. From prototyping to full scale manufacturing, the 55100 can cut materials up to 4’ x 8’ quickly and ef ciently. The simple programming takes DXF or CAD drawings and quickly creates cutting paths, making the 55100 ideal for short-run part production and just-in-time manufacturing. From small job shops to large production facilities, the 55100 JetMachining Center reduces cutting times and increases pro tability.
• Fastest cutting speeds and best precision compared to any abrasivejet in the industry and is backed by our exclusive Intelli- MAX® Software with real world cutting data
• Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
• Does not create heat-affected zones or mechanical stresses
• Programmable Motorized Z-Axis with a precision MAXJET® 5i
Nozzle Assembly can boost cutting productivity and process more
• No tool changes and minimal xturing reduces setup by 50% or

Image | Omax 55100 Waterjet With Tilt A Jet

Surplus Equipment for Sale- Surplus For Sale- Go to Infinity Turbine Website

Search Engine Contact: